| Water
& Wastewater : pH/ORP
Electrodes
: Housings
: Transmitters |
 |
Typical
applications
- Industrial
waste water treatment.
- Neutralization
detoxification.
- Gas
scrubbers.
- Power
plant condsensate.
Typical
conditions
- Contaminated
water, slurries.
- 0...70°C.
- Low
conductivity (condensate).
- Aggressive
gasses (scrubber).
Typical
measuring sites
- Open
basins.
- Pipes.
- Mixing
tanks.
pH/ORP
Electrodes selection:
**
Click on the image to ENLARGE!
.jpg)
|
|
|
|
| pH/ORP
Electrodes |
|
|
InPro
4010
- pH
2...12.
- 0...60°C.
- 0...2
bar.
- Polymer
electrolyte and PSU shaft.
- Available
with Pt100, Pt1000 or without RTD.
Data
Sheet
|
- Maintenance
free electrode.
- For
general use in water applications.
- VP
cable required for electrodes with RTD.
|
|
|
|
InPro
4200
- pH
2...14.
- 0...110°C.
- 6
bar/100°C.
- 16
bar/25°C.
- Polymer
electrolyte
Data
Sheet
|
- Built-in
temperature sensor Pt100/Pt1000.
- High
performance process electrode.
- VP
cable required
|
|
|
|
HA405-FPS-SC-S8
- pH
0...14.
- 0...100°C.
- Pressure
< 2.5 bar.
- Gel
elctrolyte.
|
- Recommended
in highly acidic and oxidizing conditions.
- AS9
cable required.
|
|
|
|
Pt4805-DPA-SC-S8
- Redox
combination electrode.
- 0...100°C.
- Pressure
< 2.5 bar.
- Gel
electrolyte.
|
- Recommended
for detoxification processes.
- AS9
cable required
|
|
|
|
InPro
4500
- pH
2...12.
- 0...85°C.
- PVDF
body with 1" NPT thread for direct mounting
|
- Built-in
Pt100 or Pt1000 temperature sensor.
- Fixed
cable 3 or 10m
|
|
|
| Housings |
|
|
InFlow
751, flow through
- T-piece
in PVC or PVDF.
- Temperature
range PVC 0...60°C.
- PVDF
0...100°C.
Data
Sheet
|
- Pipe
connection d=32, 50, 63mm.
- Interface
to electrode Pg 13.5, 1" NPT, ¾" NPT.
|
|
|
|
InDip
550, immersion
- Immersion
housing for use in open basin.
- Available
in PVC (0...60°C) or PVDF (0...100°C).
- At
ambient pressure.
Data
Sheet
|
- Electrode
interface Pg13.5, 1" NPT, ¾" NPT, flange
DN40.
- Protective
cage with solution ground.
|
|
|
|
InFit
761, insertion
- For
insertion into plastic pipe.
- Available
in PVC (0...60°C) or PP (0...80°C) or PVDF
(0...100°C).
Data
Sheet
|
- Pressure
<= 4 bar : PVC (45°C), PP(60°C), PVDF (75°C).
- Electrode
interface Pg13.5.
|
|
|
|
InTrac
777-SLX
- Available
in different materials (stainless steel, PVDF) and
with different process connections. (flanges acc.
DIN, ANSI, JIS)
- Manual
version.
Data
Sheet
|
- Pneumatic
versions with positioning signal.
- Safety
design
|
|
|
| Transmitters |
|
|
pH
2100
- Neutral-language
operation through pictographs.
- Sensor
and transmitter diagnostics.
- Automatic
buffer recognition.
- 2
limit contacts.
- 1
alarm contact.
Data
Sheet
|
- 4-wire
or 2-wire version available.
- Models
for hazardous and for safe area operation.
- Wall
or panel mounting.
- HART®
communication (2-wire version)
|
|
|
|
