[[ pH MEASURING SYSTEMSl CONDUCTIVITY MEASURING SYSTEMS l DO MEASURING SYSTEMS l TURBIDITY ]]
Pharmaceuticals & Biotechnology l Food & Beverages l
Chemical Processes l Water & Wastewater
Water & Wastewater : Sensors : Housings : Transmitters

Typical applications

  • Reverse osmosis.
  • Ion exchanger.
  • Condensate.
  • Make-up water.
  • Water quality monitoring.
  • Wastewater monitoring.

Typical conditions

  • Temperatures up to 90°C.
  • Pressure upt o 10 bar.
  • Contaminated water, slurries.
  • High salt content.
  • Low to medium conductivity.

Typical measuring sites

  • Open basin.
  • Pipes.
  • Large tanks.
 Cost-efficient 4-electrode sensors with minimized flow-restrictions.
Housings in various lengths for immersion.
Simple to install flow-through housings.
Highly accurate 2-electrode sensor.
Extremely wide measuring range.
4-wire and 2-wire instruments.
2-wire instruments with HART® communication.
Same user interface for pH, DO and Conductivity.

Max. Measuring Ranges With MTPRO Conductivity Sensors : click here
Sensors
InPro 7000
  • 0.02...10000 µS/cm.
  • -10...100°C.
  • 34 bar (25°C).

Data Sheet
 

  • ¾" thread for direct installation.
  • Reliable and highly accurate precision measuring sensor with electrodes made of titanium.
InPro 7100
  • 0.01...300 mS/cm.
  • InPro: 7100: 0...80°C, 7 bar (25°C).
  • InPro 7104: -10...120°C, 14 bar (25°C).
  • ¾" thread for direct installation.

Data Sheet
 

  • Flat design minimizes accumulation of dirt.
  • InPro 7100: CPVC body, electrodes made of AISI 316L.
  • InPro 7104: PVDF body, electrodes made of AISI 316L or Hastelloy C-22.
InPro 7100-25
  • 0.01...500 mS/cm.
  • InPro 7100-25: 0...80°C, 7 bar (25°C).
  • InPro 7104-25: -10...120°C, 14 bar (25°C).
  • Ring nut for 25mm weld-in sockets.

Data Sheet
 

  • Flat design minimizes accumulation of dirt.
  • InPro 7100-25: CPVC body, electrodes made of AISI 316L.
  • InPo 7104-25: PVDF body, electrodes made of AISI 316L or Hastelloy C-22.

 
Housings
InFlow 751, flow-through
  • Polymer housing for direct installtion in pipes.
  • PVC or PVDF.

Data Sheet
 

  • DN25, DN40 or DN 50.

 
InDip 550, immersion
  • Polymer housing.
  • PVC or PVDF.

Data Sheet
 

  • Lengths: 500...4000mm.

 
Transmitters
Cond 7100
  • Single channel input.
  • Conductivity/resistivity.
  • 1 analog output.
  • 4 relays.

Data Sheet
 

  • 2/4-electrode sensor measurement.
  • USP 23 compliant.

 
Cond 7100/2
  • 2-wire.
  • Loop-powered instrument.
  • Single channel input.
  • Conductivity/resistivity.

Data Sheet
 

  • 1 analog output.
  • 2/4-electrode sensor measurement.
  • HART® communication.