[[ pH MEASURING SYSTEMS l CONDUCTIVITY MEASURING SYSTEMS l DO MEASURING SYSTEMS l TURBIDITY ]]
Pharmaceuticals & Biotechnology l Food & Beverages l
Chemical Processes l Water & Wastewater
Food & Beverages : Sensors : Housings : Transmitters

Typical applications

  • CIP/SIP.
  • Phase separation.
  • Bottle washing.
  • Beer/Soft drinks.
  • Make-up water.

Typical conditions

  • Hygienic design.
  • Steam sterilization.
  • Temperatures up to 90°C.
  • Aggressive cleaning solutions (NAoH, acids).

Typical measuring sites

  • Pipes.
  • Tanks.
 Chemical-resistant materials.
4-electrode sensors with minimized flow-restrictions.
Extremely wide measuring range.
4-wire and 2-wire instruments.
2-wire instrument iwth HART communication.
Same user interface for pH, DO and Conductivity.

Max. Measuring Ranges With MTPRO Conductivity Sensors : click here
Sensors
InPro 7001
  • 0.02...500 µS/cm.
  • -10...100°C.
  • 14 bar (25°C).
  • Steam-sterilizable to 131°C.

Data Sheet
 

  • Pg13.5 thread.
  • Body and electrodes made of AISI 316L.
  • Sensor lengths 120/225mm.
InPro 7104 / InPro 7104-25
  • InPro 7104: 0.01...300mS/cm.
  • InPro 7104-25: 0.01...500mS/cm.
  • -10...120°C.
  • 14 bar (25°C).
  • ¾" thread for direct installation or ring nut for 25mm weld-in sockets.

Data Sheet
 

  • Flat design minimizes accumulation of dirt.
  • PVDF body.
  • Electrodes made of AISI 316L.

Housings
InFit 761-25, static
  • Stainless steel, DIN 1.4435/AISI 316L, PVC, PP, PVDF.
  • For 25mm weld-in socket.

Data Sheet
 

  • Housing without protective cage recommended.
InFlow 751, flow-through
  • Polymer housing for direct installation in pipes.
  • PVC or PVDF.

Data Sheet
 

  • DN25, DN40 or DN50.

 
Transmitters
CR 7350
  • Dual channel input.
  • 2/4-electrode sensor measurement.
  • Conductivity/resistivity.

Data Sheet
 

  • 2 analog outputs.
  • 2 or 4 relays.
  • NIST-traceable calibration.

 
Cond 7100
  • Single channel input.
  • Conductivity/resistivity.
  • 1 analog output.
  • 4 relays.

Data Sheet
 

  • 2/4-electrode sensor measurement.
  • USP 23 set points.
  • NIST-traceable calibration.
Cond 7100/2
  • 2-wire.
  • Loop-powered instrument.
  • Single channel input.
  • Conductivity/resistivity.

Data Sheet
 

  • 1 analog output.
  • 2/4-electrode sensor measurement.
  • HART® communication.